|
Instructions for use |
| Fill water in the reservoir, under the dome
shaped cover. |
| Plug Cremina in a 15 Amp. 120V outlet.
|
| The Power on-off switch and frothing switch
will light. |
| When frother is ready for steaming, the
frothing switch light will turn off |
| Push the air intake pin on the frother all
the way down for min. air mix |
| The frothing on off switch will go off when
frother is ready for use. |
| Dip the Silicone tube in water. Turn
frothing switch on to prime (flush) some
water. |
| Now the frother is ready for use. Dip the
silicone tube is milk container. |
| Place steaming pitcher under the frother
and turn frothing switch on. |
| Turn the frothing switch on. Pressure of
steam jet will draw milk from container. |
| Milk passes through frother. Air will mix
and generate steady continuous microfoam. |
|
Adjusting temperature of steamed
milk |
| Using the constriction claso and nut on the
silicone tube, adjust temperature. |
| With1/2mm clockwise turn of screw, flow of
milk reduces & raises temperature
|
| Using steaming thermometer keep adjusting
the flow of milk to desired temperature. |
|
Reminder |
| For home use, water level in the reservoir
must be checked every day & refilled. |
| Do
not leave frother on, when not in use for 30
minutes or
more. |
